Industry Insights

Hackers Changed the Setpoint on Medical Freezers. Here Is What to Ask Your Supplier

Hakim Rouab
Hakim Rouab
Founder & CEO
Hackers Changed the Setpoint on Medical Freezers. Here Is What to Ask Your Supplier

On 10 November 2026, the Public Health Agency of Canada (PHAC) sent a notice to a laboratory in a Quebec health network about cyberattacks on medical-use freezers. The network passed it on that afternoon and it reached us the same day. This is our reading of it, and what we do about it.

What happened

In mid-October, attackers took over the remote-management systems of hundreds of French supermarket freezers and switched them to heating. On 2 November, the same kind of attack reached freezers across Europe. The common thread is not a brand of freezer. It is the remote maintenance access that a third-party company uses to watch and adjust the equipment from far away.

During the night of 1 to 2 November, the target was the French blood service (EFS). Attackers went through Coolworld, a refrigeration company that services three of its plasma storage sites, and pushed the temperature setting from about -30 °C to 110 °C.

Two details matter, and the headlines often skip them:

  • 110 °C was a setpoint, not a measurement. It is the value the attackers asked the controller to reach. Nobody has shown that the plasma got anywhere near it.
  • The alarms worked. The EFS says its monitoring flagged the change, staff secured the product, and no blood product was lost.

The attackers did not break into a hospital network. They went through the supplier that holds the keys. In the supermarket cases, reports describe controllers exposed to the internet and logins that were default or stolen. Changing a setpoint is a normal administrative action, so nothing looked like an attack until the temperature moved.

What PHAC asks you to do

The notice (PHAC reference 020100238264) is short. For any third-party system that maintains freezers, scientific or medical equipment:

  1. List the third-party maintenance systems you use and check whether they have had security incidents. Put the result in your biosecurity risk assessment and update your biosecurity plan.
  2. Review your cybersecurity and IT security measures for gaps.
  3. Follow the Canadian Centre for Cyber Security (cyber.gc.ca) and the Communications Security Establishment for current advice.
  4. If you are compromised, follow your emergency plan, document the incident, and report it to your biosafety officer, the Cyber Centre, local police, and PHAC when the thresholds of the Human Pathogens and Toxins Act are met.

Two systems, two risks

A freezer has two separate things around it, and they fail in different ways:

  • The control path is what sets and changes the temperature: the controller and the remote portal of the company that maintains it. This is what was attacked.
  • The monitoring path is what measures and reports the real temperature, and raises the alarm. It is also the thing that told the EFS something was wrong.

If both depend on the same supplier and the same remote access, one stolen password takes out both. Your monitoring should be independent of whoever can change the setpoint. A probe in the freezer, reading the actual temperature, does not care what the controller says it is doing.

Questions to ask any supplier that touches your freezers

You can copy these into an email today:

Question What a good answer looks like
Can you reach my equipment from the internet, and how? A named method (VPN or similar), never an open port on the controller
Who can change a setpoint, and is it logged? Named accounts, multi-factor login, a log you can read
Do you ship default passwords? No. Every credential is unique and changed at install
What happens if your own systems are breached? A written incident plan and a notification delay, in hours
Is my alarm path separate from my control path? Yes: separate probe, separate alerts
Can I see your security documents? Yes, without a long negotiation

Where ATEK stands

You will ask these questions of every supplier, so here are our answers first.

  • ATEK monitors. It does not drive your freezers. Our probes measure the real temperature and alert you. We are not the system that sets or changes the temperature, so we sit on the monitoring path, apart from the control path.
  • Federal security requirements. We hold a contract with the Government of Canada that carries security requirements under the federal Contract Security Program. The contract requires ATEK to hold a valid Designated Organization Screening at all times during the contract, a reliability status for each of our personnel who needs access to a sensitive site, and the Program’s written permission before any subcontract that carries security requirements is awarded. That is on top of our own controls.
  • Security controls aligned with SOC 2. Encryption of data at rest and in transit, role-based access with multi-factor login, audit logs, 24/7 security monitoring, tested backups, and security reviews of our own vendors. The details are on our SOC 2 page. We say “aligned”, not “certified”, because that is the accurate word today.
  • AI-assisted review of our own code. We use artificial intelligence to look for vulnerabilities in our code before it ships, so problems are caught earlier than a periodic audit would catch them.

No honest supplier can promise that nothing will ever happen. What you can ask for is a short attack path, alarms that do not depend on the thing being attacked, and a supplier who answers the questions above in writing. We do.

If your organization is reviewing its third-party systems after this notice, talk to our team. We will answer your questionnaire and send our security documents.

Hakim

💡 Did you know?

Peace of Mind for Your Critical Assets

ATEK's automated monitoring records the temperature history continuously, so a cold-chain incident is judged on what was actually recorded instead of on a single min/max reading — assess and decide, against your own procedure, instead of discarding everything.

Share this article:
Back to all articles
Hakim Rouab

Hakim Rouab

Founder & CEO

Expert in environmental monitoring, regulatory compliance, and cold chain management for pharmaceutical and healthcare industries. Passionate about helping organizations achieve compliance while streamlining their operations.

Start Today

Ready to Simplify Compliance?

See how ATEK's environmental monitoring platform can help protect your critical environments while streamlining regulatory compliance.

Chat with ATEKWe reply within seconds
📞 Call sales 📞 Call technical support

1-855-982-2835: option 3 for sales, option 2 for support. Alarm going off? 24/7 emergency, option 1.

Or leave your name and number and someone from the team will call you back.

Who are you? Optional: your email lets the team find your record.

Image ready to send